For in-vitro laboratory research use only. Not for human or veterinary use.
SS-31 10mg lyophilised research peptide vial, batch UKPL-8613
Peptides

SS-31 10mg

99.846% RP-HPLCJanoshik AnalyticalBatch UKPL-8613

£32.99£3.30/mg

In Stock · Ready to Ship

Minimum order £299.00 per basket: mix any products. Research kits meet it on their own.

Dispatched same day if ordered by 3pm (Mon–Fri) · Royal Mail Tracked 24

Multi-vial pricing
Basket-wide vial pricing
Vials in basketPer vialSaving
1–2£32.99—
3+£31.345%
5+£30.358%
10+£29.0312%

Discounts are basket-wide: mix any vials.

Documentation for each item ships with your order.

For in-vitro laboratory research use only. Not for human or veterinary use.

Batch & documentation

Batch
UKPL-8613
Purity
99.846%
Method
RP-HPLC
Laboratory
Janoshik Analytical

Documentation for each item ships with your order. The batch number printed on your vial matches it.

SS-31 (elamipretide, also referenced as MTP-131) is a synthetic aromatic-cationic tetrapeptide with the sequence D-Arg-Dmt-Lys-Phe-NH2, where Dmt is 2',6'-dimethyltyrosine. The alternating cationic and aromatic residues give the molecule a net positive charge at physiological pH while remaining membrane-permeant, and it is this combination that underlies its defining property: selective association with cardiolipin, the signature phospholipid of the inner mitochondrial membrane. Research has focused on how that interaction affects cristae curvature, the assembly of electron transport chain supercomplexes, and electron leak at complexes I and III. Because the peptide targets a structural lipid rather than a receptor, it is investigated across a wide range of mitochondrial bioenergetics models, including primary mitochondrial myopathy, cardiolipin remodelling disorders and ischaemia-reperfusion. Supplied as lyophilised powder.

What is SS-31 ?

SS-31, also written SS31, is a synthetic mitochondria-targeted tetrapeptide. In the clinical literature it is elamipretide, and earlier development names were MTP-131 and Bendavia. SS-31 is sold here as white lyophilised powder in 10mg and 50mg vials.

The sequence is D-Arg-Dmt-Lys-Phe-NH₂, where Dmt is 2′,6′-dimethyltyrosine. Alternating cationic and aromatic residues give it a net positive charge while letting it cross membranes. The D-arginine and the unnatural Dmt residue make the backbone resistant to proteolysis.

Its target is a lipid, not a receptor. SS-31 binds cardiolipin, the phospholipid of the inner mitochondrial membrane that cristae need to form (Birk et al., J Am Soc Nephrol, 2013).

SS-31 Research Applications

  • Bioenergetics models : isolated mitochondria and permeabilised-fibre respirometry, membrane potential and ATP recovery assays, and reactive oxygen species measurement.
  • Ischaemia-reperfusion : renal and cardiac models built on the cristae-protection findings of Birk and colleagues.
  • Cardiolipin chemistry : peptide binding and cytochrome c peroxidase studies in model membranes.
  • Clinical literature : a Phase I/II trial in primary mitochondrial myopathy (Karaa et al., Neurology, 2018), then a Phase 3 trial that missed its primary endpoints (Karaa et al., Neurology, 2023).

In 2025 the US FDA granted elamipretide accelerated approval for Barth syndrome, under the name Forzinity (Bedoyan and Vockley, Cell Metab, 2026). The research-grade SS-31 sold here is not that medicine. It is supplied for in-vitro laboratory research only.

Why Cardiolipin Targeting Is Studied

Most peptides act through a receptor expressed on particular cell types. Cardiolipin sits in the inner membrane of every mitochondrion, so one tool compound can be used in cardiac, renal, skeletal muscle or neuronal preparations. Birk and colleagues showed the SS-31 and cardiolipin complex blocks the peroxidase activity of cytochrome c, which otherwise oxidises cardiolipin during ischaemia. In rat kidney ischaemia, pretreatment protected cristae, prevented mitochondrial swelling and sped ATP recovery on reperfusion. The same ubiquity is a caution: tissue selectivity cannot be assumed, so attribute effects by measurement.

Research Overview

SS-31, also written SS31 and known in the clinical literature as elamipretide, MTP-131 or Bendavia, is a synthetic aromatic-cationic tetrapeptide with the sequence D-Arg-Dmt-Lys-Phe-NH₂, where Dmt is 2,6-dimethyltyrosine, a non-proteinogenic tyrosine analogue carrying methyl groups on the two ring positions flanking the phenolic hydroxyl. Its molecular formula is C₃₂H₄₉N₉O₅, molecular weight 639.79 g/mol, CAS number 736992-21-5. The alternating cationic and aromatic residues give the molecule a net positive charge at physiological pH while leaving it membrane-permeant, and the D-configured arginine together with the unnatural Dmt residue confers resistance to proteolytic degradation. Mechanistically, SS-31 is unusual in this catalogue because its target is not a receptor at all. Birk and colleagues (J Am Soc Nephrol, 2013) demonstrated that the peptide concentrates in the inner mitochondrial membrane by interacting with cardiolipin, the signature phospholipid of that membrane, and that in ischaemia models this interaction re-energised the mitochondria, improving electron transport chain function and reducing reactive oxygen species generation. Because cardiolipin is present in essentially every mitochondrion rather than in one tissue type, the compound is studied across cardiac, renal, skeletal muscle and neuronal bioenergetics models. SS-31 also has something almost no other compound in this catalogue has: genuine randomised controlled trial history. Karaa and colleagues (Neurology, 2018) published a randomised dose-escalation trial of elamipretide in adults with primary mitochondrial myopathy. The honest completion of that story is that later Phase 3 work was mixed, the SPIMM-301 trial in the same indication did not produce unambiguously positive outcomes, so elamipretide remains an investigational compound with no marketing authorisation in the UK or anywhere else. The trial record distinguishes the molecule; it does not license it. Each vial contains 10mg of SS-31 as white lyophilised powder, batch UKPL-8613, independently verified at 99.846% purity by RP-HPLC (Janoshik Analytical, September 2026) with 11.68mg measured vial content against the 10mg label claim, certificate published on this page. A 50mg bulk vial is listed separately. Supplied strictly for in-vitro laboratory research use only.

Storage and Reconstitution

Keep sealed vials at -20°C, away from light and moisture. After reconstitution, keep the solution at 2-8°C and use it within 4 weeks, or freeze single-use aliquots at -20°C. Oxidation of the phenolic Dmt ring is the degradation route to guard against, so store solutions dark with little headspace and avoid repeated freeze-thaw cycles.

Vials are sold on their own, without bacteriostatic water for mixing or other supplies.

How to reconstitute and handle

Bring the vial to room temperature and swab both stoppers with alcohol. Add bacteriostatic water slowly down the inside wall of the vial. SS-31 is highly water-soluble and a clear, colourless solution forms almost at once, so there is no need to shake. The Dmt ring is phenolic, so keep the solution away from strong oxidisers and bright light. Label the vial with the reconstitution date.

  • A 639.79 g/mol tetrapeptide dissolves rapidly and needs no agitation, never shake or vortex.
  • Aliquot reconstituted stock into single-use volumes and avoid repeated freeze-thaw cycles. Label each aliquot with the reconstitution date for experimental reproducibility.

For the full method, see the peptide reconstitution guide and the reconstitution calculator.

Research References

Published research on SS-31 is indexed on PubMed. See our full UK buyer's guide for SS-31 and UK buyer's guide for SS-31 10mg.

Specifications

CAS number736992-21-5
Molecular formulaC₃₂H₄₉N₉O₅
Molecular weight639.79 g/mol
SequenceD-Arg-Dmt-Lys-Phe-NH₂ (Dmt = 2,6-dimethyltyrosine)
FormLyophilised powder
AppearanceWhite lyophilised powder
Release specification≥98.0%
Storage-20°C lyophilised, 2-8°C reconstituted

Laboratory handling

Store sealed lyophilised vials at −20 °C, protected from light and moisture. For preparation, aliquoting and storage of reconstituted stock, see the laboratory reconstitution guide and the concentration calculator.

SS-31: frequently asked questions

How does SS-31 work?

Unlike most peptides in this catalogue, SS-31 does not act at a cell-surface receptor. Birk and colleagues (J Am Soc Nephrol, 2013) demonstrated that the peptide concentrates in the inner mitochondrial membrane and interacts with cardiolipin, the phospholipid unique to that membrane, and that in ischaemia models this interaction re-energised the mitochondria, improving electron transport chain function and reducing reactive oxygen species generation. Targeting a structural lipid rather than a receptor is why it is studied across so many different tissue models.

Is SS-31 the same as elamipretide?

Yes. SS-31, elamipretide, MTP-131 and Bendavia all refer to the same tetrapeptide, D-Arg-Dmt-Lys-Phe-NH₂ at 639.79 g/mol. SS-31 is the original research-series designation, elamipretide is the international non-proprietary name used in the clinical trial literature, and MTP-131 and Bendavia were development-stage names. When comparing published papers or certificates of analysis, all four names describe one molecule.

Has SS-31 been tested in humans?

Yes, and that is genuinely rare for a research peptide. Karaa and colleagues (Neurology, 2018) published a randomised dose-escalation trial of elamipretide in adults with primary mitochondrial myopathy. Honesty requires the other half of the story: subsequent Phase 3 work in that indication, the SPIMM-301 trial, produced mixed outcomes, and elamipretide holds no marketing authorisation anywhere. Its clinical status remains investigational, which is precisely why it is supplied here as a research compound only.

What is in an SS-31 vial?

Each vial contains 10mg of SS-31 supplied as a white lyophilised powder. Batch UKPL-8613 was analysed by Janoshik Analytical in September 2026 and verified at 99.846% purity by RP-HPLC, with 11.68mg measured content against the 10mg label claim, the full certificate is published on the product page. A 50mg bulk vial is also listed for researchers who need larger quantities.

Where can I buy SS-31 in the UK?

You can buy SS-31 online from Peptaro, in 10mg and 50mg vials from UK stock. Orders placed before 3pm UK time on a working day are dispatched the same day. tracked UK delivery is free on every order.

Is your SS-31 independently tested?

Yes. Batch UKPL-8613 has a third-party certificate reporting 99.846% purity by RP-HPLC. The full certificate is published on the product page, and the batch number on it matches the one printed on the vial.

What is SS-31 peptide used for in research?

SS-31 is used in preclinical mitochondrial research: cardiolipin binding, cristae structure, ATP recovery, electron transport and reactive oxygen species in ischaemia and bioenergetics models. It is also one of the few research peptides with a randomised trial record, as elamipretide.

How should SS-31 be stored in the lab?

-20°C lyophilised, 2-8°C reconstituted. For preparing and aliquoting stock solutions, see the laboratory reconstitution guide.

How quickly is SS-31 dispatched in the UK?

Orders placed by 3pm Monday to Friday (excluding bank holidays) are dispatched the same working day by Royal Mail Tracked 24. Delivery is free, tracked and cold-packed. The minimum order is £299.

Related research compounds

5-Amino-1MQ 50mg research vial

5-Amino-1MQ

10mg · 50mg

In Stock · Ready to Ship
98.75% RP-HPLC + ESI-MSJanoshik
from £29.99from £0.70/mg

Glutathione 1500mg research vial

Glutathione

1500mg

In Stock · Ready to Ship
99.119% RP-HPLCJanoshik
£38.99£0.03/mg

L-Carnitine 600mg/ml, 10ml research vial

L-Carnitine

600mg/ml,10ml

Not yet available
98% HPLC
£29.99
MOTS-C 10mg research vial

MOTS-C

10mg · 40mg

In Stock · Ready to Ship
98.46% RP-HPLCMarfleet
from £24.99from £1.75/mg

Your basket

Your basket is empty.

Subtotal
£0.00
CheckoutView basket

Documentation for each item ships with your order. For in-vitro laboratory research use only. Not for human or veterinary use.